Methyl MQ resin products

What are the main technical indicators of methyl MQ resin products, and how do they differ in their applications?

Methyl MQ resin is a type of silicone resin with a three-dimensional spherical network molecular structure. Its core is a high-density cage-like SiO₂ structure, covered by a methylsiloxane layer. This structure gives it wide temperature range tolerance, high light transmittance, and water-repellent properties.

The main technical indicators of the product include solid content, M/Q ratio, solvent type, volatile content, viscosity, specific gravity, and appearance. These indicators directly affect its application performance.

The key technical indicators of methyl MQ resin and their impact on applications are as follows:

Solid content: Usually required to be high, such as ≥95%, to ensure the concentration of active ingredients, suitable for applications requiring high filling efficiency, such as silicone rubber reinforcement or high-temperature resistant coating preparation.

M/Q ratio: This is a core parameter, with a common range between 0.6:1 and 1:1. Adjusting the M/Q ratio can control the polarity, crosslinking density, and compatibility of the resin; a lower M/Q ratio (e.g., 0.6:1) enhances heat resistance and mechanical strength, suitable for electronic potting compounds or LED packaging; a higher M/Q ratio (e.g., 1:1) improves flexibility and adhesion, suitable for pressure-sensitive adhesives or release agents.

Solvent type: Commonly used solvents include toluene, xylene, or 120# solvent oil. The choice of solvent affects the solubility and processing viscosity of the resin; polar solvents (such as toluene) are suitable for electronic materials to avoid ionic impurities, while non-polar solvents (such as D5) are used in daily chemical products to ensure safety.

Volatile content: Usually controlled below 1-2%. Low volatile content ensures no bubbles and volume shrinkage in high-temperature applications, crucial for optical-grade encapsulants or semiconductor potting.

Viscosity and appearance: The product can be in powder or viscous fluid form, with a viscosity range of 20-30 mPa·s (60% solid content). The powder form is convenient for storage and transportation, suitable for powder coatings; the fluid form is directly used in addition-curing silicone rubber to simplify the process.